1 / 3
Strata Canyon Desk Organizer and Stationary Stand — zdjęcie 1
1 / 3

Strata Canyon Desk Organizer and Stationary Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Desert-butte desk organiser: 26 rock layers in 13 ColorMix shades from 5 spools. One filament per layer, no supports.

Ocena
0 / 5
Polubienia
13
Pobrania
9
Wydruki
0
Wyświetlenia
89
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Strata Canyon is a desk organiser shaped like a group of desert buttes. It is built for Prusament PLA ColorMix: each of its 26 rock layers has its own colour recipe, so five spools give 13 mixed shades plus pure White and Black.

WHY IT SUITS COLORMIX

- The printer makes a mixed colour by alternating filaments layer by layer, which is how sedimentary rock is built. Any fine striping reads as geology.

- The strata sit at the same height on all four buttes, so every print layer uses a single filament.

- Hard layers are vertical cliffs and soft layers are slopes that step inwards. Nothing overhangs, and the visible faces are near-vertical, where mixing looks cleanest.

- Flat tops are pure White and the plinth is pure Black, so no mixed colour lands on a top surface.

WHAT YOU GET

- Pen cup: opening about 44 x 40 mm, 106 mm deep

- Clip cup: opening about 41 x 46 mm, 54 mm deep

- A solid 87 mm spire and a 42 mm mitten butte

- Overall size 204 x 132 x 110 mm

THE FILE

- PrusaSlicer 2.9.6 project for the Original Prusa XL 5T (Input Shaper, 0.4 mm nozzle), 0.15mm SPEED profile

- One object with 27 bodies (plinth plus 26 strata), each already assigned to its extruder

- 13 virtual extruders with 2-, 3- and 4-layer cycles. The full table is in the last image.

- Slots: 1 Cyan, 2 Magenta, 3 Yellow, 4 White, 5 Black. All five are needed.

- Layer boundaries are designed for 0.15 mm layers with a 0.2 mm first layer. 10% gyroid infill, no supports.

STATUS

Not test-printed yet. The images are renders. Colours are the ones PrusaSlicer's mixing model predicts for the ColorMix filaments.

Tagi