Strata Canyon Desk Organizer and Stationary Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desert-butte desk organiser: 26 rock layers in 13 ColorMix shades from 5 spools. One filament per layer, no supports.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 9
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution
Strata Canyon is a desk organiser shaped like a group of desert buttes. It is built for Prusament PLA ColorMix: each of its 26 rock layers has its own colour recipe, so five spools give 13 mixed shades plus pure White and Black.
WHY IT SUITS COLORMIX
- The printer makes a mixed colour by alternating filaments layer by layer, which is how sedimentary rock is built. Any fine striping reads as geology.
- The strata sit at the same height on all four buttes, so every print layer uses a single filament.
- Hard layers are vertical cliffs and soft layers are slopes that step inwards. Nothing overhangs, and the visible faces are near-vertical, where mixing looks cleanest.
- Flat tops are pure White and the plinth is pure Black, so no mixed colour lands on a top surface.
WHAT YOU GET
- Pen cup: opening about 44 x 40 mm, 106 mm deep
- Clip cup: opening about 41 x 46 mm, 54 mm deep
- A solid 87 mm spire and a 42 mm mitten butte
- Overall size 204 x 132 x 110 mm
THE FILE
- PrusaSlicer 2.9.6 project for the Original Prusa XL 5T (Input Shaper, 0.4 mm nozzle), 0.15mm SPEED profile
- One object with 27 bodies (plinth plus 26 strata), each already assigned to its extruder
- 13 virtual extruders with 2-, 3- and 4-layer cycles. The full table is in the last image.
- Slots: 1 Cyan, 2 Magenta, 3 Yellow, 4 White, 5 Black. All five are needed.
- Layer boundaries are designed for 0.15 mm layers with a 0.2 mm first layer. 10% gyroid infill, no supports.
STATUS
Not test-printed yet. The images are renders. Colours are the ones PrusaSlicer's mixing model predicts for the ColorMix filaments.
