Pontiac Firebird Key Chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This keychain imitates the front end of a 4th generation Pontiac Firebird Trans Am WS6 with the famous ram air hood.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
The original STL model is quite large, so I scaled it down to 70% for the size shown in the photos. Feel free to adjust the scale to fit your needs, but keep in mind that finer details might be lost if you go too small.
For the multi-color effect, I painted the first 3 layers black to add contrast to the details. This is completely optional—feel free to skip it if you don't have an AMS or prefer not to mess with manual pauses.
Recommended Settings:
I highly recommend enabling top-layer ironing for the cleanest possible finish (though ironing settings may need to be adjusted, as each printer is different).
Increasing top shell layers can help improve ironing results.
Layer Height: 0.16mm
Infill: 20% (for increased strength, since keychains can be fragile).
I hope you enjoy this model, and happy printing!