Liczymy pasujące modele…
Easy to make Pikachu pixelated from Gameboy game of 2000 keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Heat gun Einhell TH-HA 2000/1 wall mount
Wydruk około 7,28 €–8,89 € nettoWstępna wycena jednego wariantu
Volvo V70 model modified for 3d printing. Original model by Dennis Andersson on sketchfab. Modifications : Removed interior added cylinders for the wheels
Brass-nut holes' size is 4.7mm (diameter) x 6mm (depth). You can insert M3x4x5 or M3x6x5 brass nuts.
Includes STLs for both left and right. They screw into the parcel shelf and mine have worked as intended since 2022. Print in PETG preferably to put up with the car getting hot.
These fit into my 2003 Toyota Celica trunk and hold up the "package tray". Passenger's side is provided. Flip to get the driver's side. Toyota Celica 2000-2005 Parcel Shelf Black Fixing Blocks / Package Tray Clips 64323-10040-CO Print…
It's a stand for the cheap Emulation Handheld Data Frog SF2000
You will need to print this like the photo. Vertical. I do 80 percent infill with normal support on the bed only.
Filament: ABS Layer thickness: 0.20 mm Filling: 100%
This is a mount that attaches to the Modifry S2000 mount Features - Slim mount, only 8mm thick - Easier line of sight by raising iPhone up 2.5 inches from center of mount - Phone can oriented in portrait or landscape - Fits MagSafe…
Daniel Jackson ship at 1:2000 scale (40cm long). The stand is available on my profile, only the “support interface" is specific to this model : https://www.printables.com/fr/model/250596-stargate-ship-stand At 100% and with MMU, the print…
This is a dual finger charger pull for a Kel Tech Sub 2000. The stock one is thin and hurts my finger while pulling. This can be glued around (trying to figure out a good mounting solution that can be more easily removed) the charger and…
I couldn't find a model online, so I made one myself. Made for original controller nozzle 0.4 layer: height 0.12 infill: 15% Ironing: all top surfaces Ironing speed: 30 Ironing flow: 26% Suport normal snug
Cushioned stock attachment for KelTec Sub2000. Many aftermarket pads required drilling holes and running bolts through the stock. Printed in TPU this one slides up from the bottom without any hardware. Slicer Settings w/.6mm nozzle: .2mm…
The Kel Tech Sub 2000 is too short for me to comfortably aim so I built this stock extender that doesn't require drilling the stock and is a more secure mount than another model I was able to find. This was made to utilize…
Replacement stock style Parking Brake Release for Honda S2000. (E-Brake Button) May fit other hondas. Recommend tapping with M5x.8 Print Settings Printer Brand: LulzBot Printer: Mini Rafts: No Supports: No Resolution: .2 Infill: 12%…
Replacement case for the Simagic P2000 Haptic Control board. Blocks the extremely bright LEDs to avoid lighting up your room. Newer "p2000box_2" tops have increased tolerances for the USB connector based on comments. Closed version is…
A case inspired by the aesthetic of early 2000s PC cases. You can choose between two included designs. Needed hardware If you want to secure the case cover using knurled M3 screws, similar to those commonly found on older PC cases, you…
I wanted to hide the bright green LED and I needed a way to mount the controller to my rig, so I came up with this box. You'll need to flip the lid when you print it, so the side with the letters is facing up. Otherwise, I don't think the…
Print upside down. No support should be necessary. For heavy duty, use 100% infill although less should be also fine. Make sure to use a food-safe filament if you plan to store food in the jar.
Print with a higher nozzle temp, as the handle has snapped on me during testing. This is designed for the Gen 2, not sure if it's compatible with other generations. Retains auto-deploy functionality when the rifle is unfolded. For now,…
hole = 21,5mm and it is tall 25mm
Recommended print settings: Material: PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled Full disclosure - I have not printed this part, nor do I have a DS2000 to try it on. I designed…
This is a mount for a Mean Well RSP-2000-48 power supply. It is intended to be mounted in the vertical orientation. The lower bracket is intended to support the weight of the power supply on the lip that sticks out a few mm. Supports 1/2"…
Replacement server rack handles for Intel R2000 series servers. This was specifically tested to fit on my R2308WTTYSR.
I struggle making round meataballs. My paws are too big, I'm clumsy and I get ground meat stuck to everything. Many commercial meataball presses suffer from the meat getting stuck inside the hollows, and require you to pick out and…
The brand new Sunlu filament welder is a great solution for splicing all those short end-of-roll tails you have lying about. However, imho, there is one big flaw and that is how to align, weld and extract the heated filament/joint without…
Gedruckt mit PLA Für Makita Akku Adapter: Makita Battery Mount by GPlatek on Thingiverse: https://www.thingiverse.com/thing:352094 AkkuTerminal: https://www.ebay.de/itm/386728240720 Module: Voltmeter: https://www.ebay.de/itm/135144196030…
Gedruckt in PLA Für Makita Akku Adapter: Makita Battery Mount by GPlatek on Thingiverse: https://www.thingiverse.com/thing:352094 AkkuTerminal: https://www.ebay.de/itm/386728240720 Module: Voltmeter: https://www.ebay.de/itm/135144196030…
Adapter plate to stack Siglent SDG2000X on uni-t UDP3305S-E. Includes front and back adaptors/spacers and a step file for the right front bumper if you want to make another adaptor.
Hi. I've designed a corner cover for Baseus powerbank. Bottom and top of the case are opened for better heat distribution and access to ports. Sides fully closed. There is also an opening for a function button. THIS DESIGN COVERS CORNERS…
Recommended print settings: Material: PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled I may remix ed this eventually to strengthen some of the weak areas:…
Bracket / Holder for simagic board pedals P2000 or Haptic for alliminium profile. Assembly: Remove the back plate from the board and attach it to the printed part. Use the same screws as before. Easy to install. M5 screws for alliminium…
I have created this case for the DLink DWR-U2000 Mobile WiFi to have the device have a bit of protective shell.
This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a MAC M2 Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with Mac Version of WiFi Explorer Pro. Will print without supports. .2mm…
# Denon DP-900M / Pioneer PL-PM2000 - Dust Cover Hinges Replacement hinges for turntable dust covers. The original plastic hinges are known to break after 25+ years of use. Why This Model? - Many of these used turntables are sold with…
This is a item holder set for (2) Elecjet PowerPie P20k power banks or other similar sized devices. There are a lot of other models that hold power banks similar to this (Anker Powercore 20k, etc), but won't fit a slightly thicker device…
If you use Cura for your slicer, print this at 150% size so it can fit onto a keychain.
Print with a higher nozzle temp, as the handle has snapped on me during testing. This is designed for the Gen 2, not sure if it's compatible with other generations. Retains auto-deploy functionality when the rifle is unfolded. For now,…
P2000 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
Printed on a SOVOL SV06 ACE with 0.4 nozzle and 0.28 fast printing. Printed with anycubic PLA filament at 220C.
Battery holder for hasselblad 200/2000 series
*UPDATE - 18-02-26 V2 models added, depth increased to ensure clearance of adaptor board components *UPDATE - 23-05-26 please be aware support bar at the back wont fully close due to the larger battery area Back plate battery area…
Recommended print settings: Material: PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled Full disclosure - I have not printed this part, nor do I have a DS2000 to try it on. I designed…
21700 power bank for charging phones, electronics, and for powering USB devices. The USB-A ports are 2 amp output apiece and the USB-C ports are 2 amp inputs and if you plug them both in you can charge the power bank twice as fast when it…
The Simagic P2000 Throttle Pedal Plate is designed to give you more precision and flexibility when fine-tuning your pedal setup. For installation, you will need M6 thread inserts (outer diameter approx. 7.8 mm, length 10 mm). These…
The Simagic P2000 Brake Pedal Plate is designed to give you more precision and flexibility when fine-tuning your pedal setup. For installation, you will need M6 thread inserts (outer diameter approx. 7.8 mm, length 10 mm). These inserts…
UPDATE COMIGN SOON!!!!! FOR TONES AND ROTATOR BE AWARE This is my 3D‑printable version of the Whelen WS‑2000R , built to rotate and sound as close to the real thing as you can get with hobby‑grade parts. I modeled the housing, rotator,…
This is my cup holder for my 1999 RAV4. It installs to the passenger side seat bolt. I have printed it using Bambu Labs PETG HF using 15% infill in two separate parts, then glued together with JB-WELD plastic bonder. Seems sturdy enough…
This digital package includes both a high-resolution raw 3D scan and a highly accurate, reverse-engineered CAD model of the rear passenger compartment air vent, specifically designed for the Renault Trafic Generation . What’s included:…
You will have to remove all of the plastic from the existing post in order to install this tonearm rest. You might think you want to remove the post from the turntable in order to do this. I recommend against that given how much you have…
Taking a nice miniature model, scaling it up and adding changes and detail from:
If you own a 2000 - 2006 Hyundai Elantra you know the struggle. The clock buttons are flush with the trim surface resulting in you having to poke them in with a pen etc. No more! These button are exactly the same but longer, they protrude…
A set of skyscrapers in 1:2000 scale (1 mm of height = 2 meters of actual height). This pack includes the following 5 skyscrapers: One Bloor West, the Sears Tower (Willis Tower), the St. Regis Chicago, the Wuhan Greenland Center, and the…
Someone in my family has this light, and the hinge seems to be a weak point as the part broke. I designed and tested a replacement part. I will be surprised if anyone that both needs this niche part and thinks about searching for it…
This is the Pella Designer Series sliding door blinds drive kit plastic parts. The plastic pieces broke in my door and Pella no longer makes the part. There are 3 parts here (and their mirror for opposite side blinds), the plastic case…
Replacement server rack handles for Intel R2000 series servers. This was specifically tested to fit on my R2308WTTYSR.
Replacement Locking Knob, part number 1134-3051-01. Note that I made this without having the original part (that's why I had to make one), as well as made for a custom Control Rod I hade to make myself as well. So it might not fit 100%…
Little Green Army Men : Artillery : PZH 2000 : German
The Hobby King Cloud Surfer RC Glider is "lightly constructed". It has soft foam and some weak designs. Consequently, after a few landing, the center landing wheel collapses into the fuselage and no longer works. This design replaces the…
Crouching Tiger Hidden Dragon - 2000 3D printable model.
I prefer my LoRa Radio cases to be slimline so I so i can keep them in my shirt pocket, so I designed this. You will need 4x M3 threaded inserts, 4x 6-8mm M3 bolts/screws, 4x M2 6mm, and 4x M2 4mm bolts. I printed my case in Sunlu Easy PA…
I bought a Daytona DLP2000G 2000kg Low Profile Service Jack and was unhappy with the idea of the 2-piece handle moving around in the boot of my car while travelling to jobs so i made this basic holder to hold the two pieces together. next…
I first want to say is that I DID NOT MAKE THE MODEL. I got it from here. https://boardgamegeek.com/thread/1063262/yt-2000-ship-card-and-token The painted photo was from the site as well. I want to share what I found. My friend liked the…
EDIT: Slightly improved model, made handle smoother. Do not use PLA, it will melt in the heat! Best to print out of PETG for heat resistance and layer adhesion. It can be printed in any orientation, but not without support. Would…
Broke my 22 year old OEM Nylon rod holder. So, naturally, decided to 3d print one. Was more difficult than I expected simply because I don't have nylon filament. I printed this with PETG, and the only issue is that it was really difficult…
Needed a replacement grommet for my 2005 Ford Focus. This one was almost exact, so with some minor changes this fit perfectly. You may need to file the nodule off the prop rod to make it fit, or file the grommet slightly so it can slide…
Logo Toulouse football club Old Logo de 1995-2000 i use a magnet de 8x1
I lost one of the U-Nuts of my Head Unit Cover for my Toyota Rav4 XA20, so searched far and wide for a model that can fit, but didn't find one. At the end I remixed the closest model that I could find to what I need. You can see on the…
Door Jamb Switch Nipple Boot I designed for a 2007 TOYOTA YARIS (but also might fit TOYOTA ECHO 2000 - 2005 SCION XA 2004 - 2006). Printed with Overture TPU on an Ender 5 Pro. The main nipple is a direct fit replacement for the original…
Hydraulic ram seal for farm tractor loader with 55 mm rams requiring rams seals size 55x65x12mm. This was the case for my Ålö-Quicke 2000 series farm tractor loader and these seals were made as a quick fix to stop oil from dripping in…
This is a lithophane of a Eurofighter Typhoon 2000 that lights up when backlit. A particularly low layer height is not necessary. You can just choose 0.2 or even 0.28 so it doesn't matter.
After the wheels fell off by L2000 Worx Landroid I redesigned the wheels to ones which I believe are better. Watch video for assembly instructions.
Original case broke. The dealer wanted something like 30 bucks for a replacement. So here it is. When I searched I didn't found any, that would fit my internals of the remote, so had to model a new one. For multi material import together…
You need to clear the shaft hole, there variation in the size for exactly the same bogey model so take the time to check the size of your bogey shaft first
Pajero Gen3 Gen4? MK3 2000-2006 speaker spacer and cup protector thingy It was designed for Axton 16.5cm speakers. I thinned it a bit, and added the splash shield like the OEM part has and then some holes for wires and water weeps This…
PUMP-2000: Customizable, Shell-Ejecting Toy Blaster (Plinker V3.5 Series) This is a toy that fires a projectile! Never fire at pets or unwilling participants. This can damage drywall, use caution and protective eyewear. Never brandish…
Have you ever think about “damn I wish I could've turn digital images into film negatives without using these silly fake filters”? Now here's the solution only like 3 people had been waiting for! Parts needed to assemble the full kit…
It reuses 4 of the m3 screws on the standoffs. They screw directly in the hole in the bottom of the box. Doesn't need supports if your printer is good with bridges. Maybe little supports for the conterbored holes on the cover. Need 2x…
Ahora puedes agregarle un buen powerbank a tu oculus
Prints without supports. Make sure to print it upright on the narrow straight end; print files provided that demonstrate how. Recommend 0.2mm layer.
A 4x1 gridfinity organizer for the Anker Powerbank PowerCore 20000. 15% infill 0,2mm
U-Mounts in 2000 different sizes. Easy to find the perfect fit for your needs. Available Sizes : • Inner Heights: From 3.0 cm to 25.0 cm in 5mm increments • Inner Widths: From 3.0 cm to 25.0 cm in 5mm increments Meassurement (not the…
The Lamy 2000 fountain pen normally uses a little ring that prevent the nib and feed to push up into the section. I misplaced it while cleaning mine, and before trying to find it again or order one replacement online, I estimated the size…
The parametric Autodesk Fusion file can be modified to fit your exact fan size. Excluding the air blocker plate, the model prints in four different pieces. STL files and hardware: Fit 80x80 mm and 120x120 mm fans. To mount the fans four…
3D model for hinges of Fresh 'n Rebel's CULT 3HP2000 v1 001 headphones
This is the iPhoneholder 2000. Purpose: Mount the iPhone magsafe charger to the wall without glueing the charger to the wall. Have some distance between the phone and the wall to grab it more easily Tilted angle: More comfortable viewing…
Cushioned stock attachment for KelTec Sub2000. Many aftermarket pads required drilling holes and running bolts through the stock. Printed in TPU this one slides up from the bottom without any hardware. Slicer Settings w/.6mm nozzle: .2mm…
This is an IMMOBILE vent insert. It is meant to replace all moving internals via friction fit. Printed in PA612 CF (probably overkill) but fits nice and snug. I suggest painting in your supports just along the louver edges. The client…
This is a replacement Clipsal 2000 Series Flush Surround. Allowing you to create you own Surround in in different colours. There are others, but I found they were not a very nice fit, this is designed to match the factory fitment. There…
The original holder it perfect for the Pro 100 model but too wide for Pro 500, 700, 2000 models so I made this adapter. Just print and glue into the original to adapt it
i couldnt find a sink plug for fiat ducato camper van from 2000's so i made one. size of the sink plug is h: 8mm w:31mm for top circle and 28mm for bottom circle. there is also chain clip for standard 2mm ball chain. i uploaded version…
