1 / 12
Clicks-ish Case (with chin!) for Unihertz Titan 2 Elite — zdjęcie 1
1 / 12

Clicks-ish Case (with chin!) for Unihertz Titan 2 Elite

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clicks Communicator-style phone case with ergonomic chin for easier typing

Ocena
0 / 5
Polubienia
2
Pobrania
99
Wydruki
0
Wyświetlenia
338
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

2026-11-08 Update, final design (for now): TPU liner with PETG or PLA shell case. Includes incremental changes to original case design, including a wider opening on the shell for button access. May require stronger Magnet ring. Recommend side printing the shell, and printing the TPU liner on its back.

Update: Mk2.5 revision has been uploaded. Raised hexagon design for better grip, deeper, wider opening for magsafe ring fitment and magnetization, .5mm raised lip. and a side orientation for improved printing.

Update: Mk2 revision is uploaded. Includes more pronounced back shell with etched Unihertz logo and dimples, higher graded taper on bottom of case, larger tapered opening for buttons, filled area for camera ring which is no longer needed, revised magsafe ring as the original construction created a flat point, shortened the chin by .5mm and a .3mm raised lip on the front to better protect the phone. Recommend printing from the side.

This case was designed with the Clicks Communicator in mind, as the back is modeled after it and the chin makes it about the same length, making it far less cramped to hold while typing.

I used PLA for this print but YMMV, took about 2.75h on the .20mm quality setting on the Prusa with minimal issues. Be aware that the sides of the case may be thin enough to crack, as mine had when trying to fit my magsafe ring. USB-C opening should be wide enough to fit an array of cables in different sizes.

Tagi