1 / 9
Clicks-ish Case (with chin!) for Unihertz Titan 2 Elite — image 1
1 / 9

Clicks-ish Case (with chin!) for Unihertz Titan 2 Elite

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clicks Communicator-style phone case with ergonomic chin for easier typing

Rating
0 / 5
Likes
2
Downloads
77
Makes
0
Views
240
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Update: Mk2.5 revision has been uploaded. Raised hexagon design for better grip, deeper, wider opening for magsafe ring fitment and magnetization, .5mm raised lip. and a side orientation for improved printing.

Update: Mk2 revision is uploaded. Includes more pronounced back shell with etched Unihertz logo and dimples, higher graded taper on bottom of case, larger tapered opening for buttons, filled area for camera ring which is no longer needed, revised magsafe ring as the original construction created a flat point, shortened the chin by .5mm and a .3mm raised lip on the front to better protect the phone. Recommend printing from the side.

This case was designed with the Clicks Communicator in mind, as the back is modeled after it and the chin makes it about the same length, making it far less cramped to hold while typing.

I used PLA for this print but YMMV, took about 2.75h on the .20mm quality setting on the Prusa with minimal issues. Be aware that the sides of the case may be thin enough to crack, as mine had when trying to fit my magsafe ring. USB-C opening should be wide enough to fit an array of cables in different sizes.

Tags