E3D Titan - Hypercube-S.T.E.V.E. slimline motor mount mods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In order to mount the E3D titan slimline motor some mods to the top linear bearing holder needed to accommodate the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
In order to mount the E3D titan slimline motor some mods to the top linear bearing holder needed to accommodate the wiring connector https://e3d-online.com/nema17-slimline-stepper-motor
There are 2 types of bearing holder. 1 with just a cut out for the motor connector & 1 with an additional cut out to accommodate a bracket I needed to attach my cable chain.
My bracket stl is included and a step file for those wanting to adapt it.
In order to position the motor, a spacer for the stepper motor is required Attached is a 10mm thick spacer. I ended up needing 11 mm so I non-uniform scaled it to 110%
There is also a bracing strap for the belt clamp arrangement which requires
2 pcs M3 x 30mm Allen bolts
4 pcs M3 plain nut
Category: 3D Printer Accessories