E3D Titan - Hypercube-S.T.E.V.E. slimline motor mount mods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In order to mount the E3D titan slimline motor some mods to the top linear bearing holder needed to accommodate the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
In order to mount the E3D titan slimline motor some mods to the top linear bearing holder needed to accommodate the wiring connector https://e3d-online.com/nema17-slimline-stepper-motor
There are 2 types of bearing holder. 1 with just a cut out for the motor connector & 1 with an additional cut out to accommodate a bracket I needed to attach my cable chain.
My bracket stl is included and a step file for those wanting to adapt it.
In order to position the motor, a spacer for the stepper motor is required Attached is a 10mm thick spacer. I ended up needing 11 mm so I non-uniform scaled it to 110%
There is also a bracing strap for the belt clamp arrangement which requires
2 pcs M3 x 30mm Allen bolts
4 pcs M3 plain nut
Category: 3D Printer Accessories