PM Mannequin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poseable Mannequin model 10th scale ( +/- 180 mm high) i have adapted this from and old 3d studio mesh i had on file (…
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 381
- Wydruki
- 1
- Wyświetlenia
- 3534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Poseable Mannequin model 10th scale ( +/- 180 mm high) i have adapted this from and old 3d studio mesh i had on file ( origin unknown) . Adapted to use Neodymium disk magnets & 10mm steel balls.
I have only provided the left side stl's as they can be mirrored in your slicer
Update 21 Nov 2016...i have uploaded R2 of the Torso stl. There were a few issues with R1 i wasn't happy with.
Apologies for the organised chaos that is my hobby work bench in the pictures!
Enjoy....
Steel balls ( any magnetic 10mm steel balls will work) http://www.banggood.com/16Pcs-10-M4-Threaded-Steel-Ball-Rod-Ends-For-Kossel-3D-Printer-Magnetic-Joints-p-1003375.html?p=X9120314803172015043
These are affiliate links that will cost you nothing and will help me gain points for my next project Thanks
Print Settings
Printer Brand:
RepRap
Printer:
Prusa Air 2
Rafts:
Yes
Supports:
Yes
Resolution:
012mm
Infill:
10%
Notes:
10% infil for all parts except the hands and feet where i printed super slow at 80% infil
Steel balls are glued in with super glue but can also be screwed in using M4 X 10 mm grub screws
The joints are 3mm holes and i used some 3mm PLA filament i had lying around
Elbow, knee and ankle joints will be a tight fit and need sandpaper for a smooth but stiff fit.
Category: 3D Printing