PM Mannequin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Poseable Mannequin model 10th scale ( +/- 180 mm high) i have adapted this from and old 3d studio mesh i had on file (…
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 381
- Makes
- 1
- Views
- 3,534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Poseable Mannequin model 10th scale ( +/- 180 mm high) i have adapted this from and old 3d studio mesh i had on file ( origin unknown) . Adapted to use Neodymium disk magnets & 10mm steel balls.
I have only provided the left side stl's as they can be mirrored in your slicer
Update 21 Nov 2016...i have uploaded R2 of the Torso stl. There were a few issues with R1 i wasn't happy with.
Apologies for the organised chaos that is my hobby work bench in the pictures!
Enjoy....
Steel balls ( any magnetic 10mm steel balls will work) http://www.banggood.com/16Pcs-10-M4-Threaded-Steel-Ball-Rod-Ends-For-Kossel-3D-Printer-Magnetic-Joints-p-1003375.html?p=X9120314803172015043
These are affiliate links that will cost you nothing and will help me gain points for my next project Thanks
Print Settings
Printer Brand:
RepRap
Printer:
Prusa Air 2
Rafts:
Yes
Supports:
Yes
Resolution:
012mm
Infill:
10%
Notes:
10% infil for all parts except the hands and feet where i printed super slow at 80% infil
Steel balls are glued in with super glue but can also be screwed in using M4 X 10 mm grub screws
The joints are 3mm holes and i used some 3mm PLA filament i had lying around
Elbow, knee and ankle joints will be a tight fit and need sandpaper for a smooth but stiff fit.
Category: 3D Printing