Counting matching models…
This is a study on print-in-place articulation. I wanted a small anatomical figure that was jointed. I found other great designs where you print the respective parts then assemble, but scaling down caused difficulties as the smaller snap…
Hello, Today I have 3 figurines of girls in swimsuits for you. They are suitable for coloring, for diorama, or just for an exhibition. My children love these figurines. For proper functionality, you need to use a Print Profile! I used…
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this Low-poly Mannequin Head stands on your own table in…
If you're looking for my Bambu print profile, you'll find it at MW . Doll Dress Mannequin A small dress mannequin designed for displaying or fitting doll clothing . This model provides a simple stand for showcasing handmade doll outfits,…
I printed this model on my Bambu Lab P1S using eSUN PLA+ filament, 0.4 mm nozzle, 0.2 mm layer height, 2 wall loops, 8% honeycomb infill, automatic snug normal supports at 30 deg. threshold and on build plate only. The default height of…
Units are in inches! Category: Sculptures
seamless women mannequin - 150mm height - 250mm height
Scanned models of store mannequins. Scale 1:8.
I used Prusa Slice 2.6 to split the original one piece model at the neck such that the head piece needs minimal support (ears and a little bit of the neck very close to the build plate. This is scaled up from the original (20% IIRC) to be…
Poseable Mannequin model 10th scale ( +/- 180 mm high) i have adapted this from and old 3d studio mesh i had on file ( origin unknown) . Adapted to use Neodymium disk magnets & 10mm steel balls. I have only provided the left side stl's as…
Might see if a thick felt cover can turn it into a pinnable dress form. I used only 2% support cubic infill.
A quick mannequin head base I made that can be used with standard foam heads. Use it for displaying helmets or painting. Prints easily and without supports
This is a remix of Michal Fanta’s excellent Low-Poly Mannequin Head made by mirroring the right side of his model and trimming the bottom a couple of millimeters. Since I only needed the head, the model was split horizontally at the top…
Hello, I have a figurine head for you. It is suitable as a decoration or for a wig, or just for decoration. Suitable for coloring, playing, or just for children. My children love painting these toys. The head is 249mm high to fit in the…
This was created to display 3D printed clothing. www.piper3dp.com This is a remix of axtn's Low Poly Woman. I've scaled up the model and split it into 8 pieces for 3D printing. I've included two versions of the breast area pieces as the…
A 3d figure taken from a real woman mannequin
I am posting this here so more people can find and use it, but if you're reading this I'd appreciate the download from https://makerworld.com/en/models/372030 instead so I earn credits. Thanks! Embed an M4 nut into the "to Shoulder". At…
My son and his friend decided to fit this sewing mannequin with a chain-male shirt that was quite heavy. The result was they broke mount for the legs and cracked the mount for the body. These are the replacement parts that I made to get…
I've wanted to make a real life table like this for a while now, but no space to store it , so decided i can print a miniature just for fun :D Mannequin legs with two different tabletops, square with rounded corners and a round one,…
A unique 3D printable creation — this Mannequin Hand Ring Display, Elegant Pose, Holds Rings On Fingers, Jewelry Stand Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Here is a low-poly mannequin model that I generated using this (lowpoly3d). The main purpose of the model was for my friend to prototype a dress that she was supposed to make for her university project. It can also be used as a jewelry…
This mannequin is created as a reference for seating position designs. The model is inspired by SAE J826 H-Point Manikin. It is primarily used to design automotive seating positions, but can also be applied elsewhere. The inspirational…
Support wooden dolls for artists. To install, it is necessary to drill small 8mm blind hole on bottom of your mannequin. For the arm version, 8mm diameter magnet is required. Category: Art Tools
This is a Needle case shaped as a sewing woman mannequin, that you can scale and print in any material you want. To print is recommended to use supports. When I have the printed model I will share the photo. I have used the bust that I…
Just a simple 1*1 TTRPG mannequin / training dummy Printed in PLA at 0.2mm and 10% infill No support needed Compatible for 1*1 inch grid map To assemble, print 2 of them and glue the two part together
credits to steel wool games for making this beautiful model
Some of the adjustment knobs broke down on our “Diana” adjustable dressmaker's mannequin in the textile workshop at Stockholm Makerspace , so we designed and printed some replacements. The design needs to be printed with some supports, to…
edit~~ eventually i found out i need a wall anchor to go with them. the left ones do fine. my heavier hood on the right needed a larger wall anchor. the screw base is still too thin, can potentially snap off if you're on careful with it.…
Jewelry Mannequin Display Stand For Necklaces print and enjoy.
This is a 3D scan of Alex, made to fit onto a mannequin body. We blow up lots of Alex mannequins and now you can, too!
Give your headphones a place that stands out. This sculptural headphone stand combines a distinctive geometric face with a practical way to display your headphones. Its clean white finish and artistic shape bring character to your desk,…
✨ Want to sell my designs? Subscribe to my Patreon to get a commercial license. ☕ Or, if you'd like, buy me a coffee to support my projects! A clean, minimalist, and functional 3D-printable baby mannequin torso, perfect for displaying…
Printer : i3 MK3 Rafts : No Supports : Yes Resolution : 0.20 Infill : 15% Filament Material : PLA
Half-body mannequin for DIY clothing making, no sewing or glue required.
Lost the cover / plug for the mannequin so I designed a new one Exterior circle 105mm and Interior Plug 40mm by 15mm length with hole
Have you ever wanted to mount a fake head to a piece of VESA-sized hardware? No? Okay, just me, then. Anyway, here's a thing someone might need sometime. I used it to mount a wig-making mannequin head from amazon to a random monitor…
Dress Mannequin Tripod attachment. Infill 60% or greater and walls at 1.2mm minimum. needs Structure Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0.2 Infill: 60% Filament: Pantech PLA White How I Designed This…
The original 'thing' is great if you have a real mannequin, yet I am building one out of PVC tubing, so it needed some modification to work with my build. This model has been adjusted a couple of ways: Wire holes resized for 3mm wire…
- Movable: Action figure is equipped with pedestal support, the figure’s joint is movable, so it can be changed into any pose you want and is a good helper for practicing drawing sketch - Variety of Accessories: Instantly create poses for…
