Synthwave Sunset Brush and Pen Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A retro sunset for SKÅDIS: 7 brushes or pens stand upright in 8-14 mm holes with matching pockets in the horizon shelf.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A retro synthwave sunset that keeps seven brushes or pens standing upright on a SKÅDIS board.
What it holds: the striped sun is the back plate and the horizon line is a shelf. Seven holes in the upper shelf (8, 10, 12, 14, 12, 10 and 8 mm) line up with seven pockets in the horizon shelf, so every brush is held in two places and stands straight. Drop a brush in from above and lift it straight out.
How it mounts: push two clips into SKÅDIS slots 80 mm apart, let them drop about 7 mm, then lower the rack onto them. Two more clips are optional. Lift about 6 mm and pull to take the rack to your desk.
Parts: 1 rack and 4 clips, all in the one file.
Print settings: PLA, 0.4 mm nozzle, 0.2 mm layers, no supports, 3 walls, 10 to 15% infill. It prints standing upright, as laid out in the file.
Colour swaps (optional): dark purple to start, cyan at 16.0 mm, magenta at 16.8 mm, orange at 42.0 mm, yellow at 74.0 mm.
Assembly: none. Clips into the board, rack onto the clips.