Scottex holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple L bracket to hold a roll of scottex
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Scottex Holder
This is a model built to hold a standard 200x150mm roll of scottex paper attached to the underside of the kitchen
I recommend using petg to print it if you plan to mount it near heat sources but if it isn't near one pla will work just fine.
There are two files portascottex vFIN and portascottex the vFIN version is the one big piece you might need to divide it using the dovetail joint option in the slicer; if you can't use it there is the 3mf file where it has been already done.
Materials needed:
2 woodscrews at least 30mm long and not thicker than 2,5mm