LayersFactory
Zgłoś model
1 / 8
Shadow Text Lamps — zdjęcie 1
1 / 8

Shadow Text Lamps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

nexus

nexus

@nexus

A projection lamp that writes a message on your wall with light. Fits IKEA KAPPLAKE. Generator included.

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane

Turn a wall into a message.

A projection lamp: print the parts, snap them together and drop in an IKEA KAPPLAKE LED spotlight. Switch it on and the text is projected — sharp and correctly readable — onto the wall around the lamp.

VARIANTS INCLUDED

  • LOVE YOU

  • BRING BEER

  • PŘINES PIVO 🍺

  • F*CK OFF

HOW IT WORKS

The shade is the exact inverse central projection of the message, so the text reads correctly on the wall. Base-on-wall design; the light enters from the top. Letters that fall behind the lamp can't shine through, so they are printed as a raised relief on the front face — the message stays continuous.

FEATURES

  • Fits an IKEA KAPPLAKE LED spotlight (holder included)

  • Snap-in bottom cap with side or bottom cable outlet

  • Captive on/off button that prints in place in its own seat

  • Ready 3MF: shade, bottom cap and button already laid out on the bed

  • Minimal assembly

  • Any text, font, size or SVG logo can be generated with the free web generator (below)

REQUIRED PART

IKEA KAPPLAKE LED spotlight, white (USB powered).

PRINTING

  • 0.4 mm nozzle, 3 walls, supports when needed for cuts

  • Layer height 0.15 mm

  • Opaque filament for the shade (light/white inside); optional second colour for the front text

  • PLA or PETG

GENERATE YOUR OWN

https://lamp.smoula.net/generator

The free web generator turns any text or an SVG logo into a ready 3MF. Change the message (multi-line, per-line cap height, extra tracking, mirror/rotate), use any built-in font or upload your own TTF/OTF, and mix in monochrome emoji. Tune the diameter, height, wall thickness, projection mode (wall or wrap), light-source distance and every fitting — KAPPLAKE holder, on/off button, top/bottom caps, rounded edge, mount and cable outlet (none/side/bottom with angle). SVG support is limited: paths (including arcs), basic shapes and group transforms only — strokes, gradients, <text> and images are ignored. Set the front-text relief to 0 for a flush inlay and the 3MF slices straight into two materials, so you can print it in colour on an MMU/AMS.

Free for personal use — make it, remix it, give it away, just credit.

Tagi

lampgifttextprojection