1 / 10
House e-ink tag case – fridge magnet, keychain, wall & tape mount (Pingente) — zdjęcie 1
1 / 10

House e-ink tag case – fridge magnet, keychain, wall & tape mount (Pingente)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

House-shaped case that turns a Bluetooth e-ink tag into a tiny display you change from your phone.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution

Wi-Fi QR code and house rules for guests.

You need an e-ink tag and the free Pingente app (Android). Pingente does not sell hardware: buy the tag anywhere, print this house case, and the app turns the tag into a tiny display you change from your phone. One-time activation per tag, no account, no subscription. Get the app: https://play.google.com/store/apps/details?id=app.pingente · https://pingente.app

WHAT THE TAG SHOWS

A paper-like e-ink screen that keeps its image with no power and runs on two CR2450 coin cells. Change it from your phone: weather, countdowns, lists, due dates, your photos, handwritten notes, Wi-Fi and contact QR codes, the Moon, the fact of the day and more.

  • Free faces, no activation: Note, Wi-Fi QR, Art, Postcard, Motivation, Fact of the day, Verse of the day, Moon and Alert.

  • Every other face unlocks with the tag's permanent activation: US$ 1.99, paid once per tag, no subscription.

  • No account, no password, no cloud. Android now; iOS later.

FOUR WAYS TO MOUNT IT

Every tag size comes in four versions, all with the same front:

  • Fridge magnet: two 10 × 3 mm neodymium magnets glue into recesses on the back. A raised ring around each one means the plastic, not the magnet, touches the fridge, so it does not scratch the paint.

  • Keychain / luggage tag: a 6 mm hole for the cord. For keys, backpacks, suitcases and leashes.

  • Wall mount: two countersunk holes for 4 or 5 mm screws, one on each side of the tag. For doors, walls and furniture. Screw it first, then fit the tag.

  • Tape mount: a completely flat back for two strips of foam double-sided tape. For drawers, cabinet doors, bed panels and hotel doors: where you cannot drill and a magnet will not stick.

WHAT IS IN THIS MODEL

One folder per tag, four files in each (keychain, magnet, tape, wall). Pick the folder of the tag you bought:

  • For the Gicisky 2.1": keychain 90 × 65 mm · fridge magnet 117 × 65 mm · tape mount 117 × 65 mm · wall mount 117 × 65 mm · 14 mm thick

  • For the PANDA 2.13": keychain 90 × 68 mm · fridge magnet 117 × 68 mm · tape mount 117 × 68 mm · wall mount 117 × 68 mm · 14 mm thick

  • For the Gicisky 2.9": keychain 111 × 77 mm · fridge magnet 144 × 77 mm · tape mount 144 × 77 mm · wall mount 144 × 77 mm · 14–15 mm thick

  • For the WOLINK 2.9": keychain 119 × 77 mm · fridge magnet 136 × 77 mm · tape mount 136 × 77 mm · wall mount 136 × 77 mm · 9–10 mm thick

Every file is already oriented front face down and fits a 180 mm bed.

The tag snaps in from the front, locks on small ribs and sits flush with the part. To change the coin cells, pull it out the same way. No glue on the tag, no screws, no supports.

WHAT TO BUY

The tag (pick the Bluetooth single-tag, app version; base-station versions do not work with the app):

For each version:

  • Fridge magnet: 2 neodymium magnets, 10 × 3 mm, and a little glue: https://www.aliexpress.com/item/1005010231587515.html (the listing sells every size; pick 10x3)

  • Keychain: 2 mm paracord as a folded loop, 4 mm paracord with a knot, or a 20–25 mm split ring. Paracord ends melt and do not fray.

  • Wall mount: 2 countersunk screws, 4 or 5 mm, with wall plugs.

  • Tape mount: foam double-sided mounting tape, about 1 mm thick: two strips of 12 × 40 mm. Thin tape does not grip the printed texture of the back.

HOW TO PRINT

  • 0.4 mm nozzle, 0.2 mm layers

  • 3 walls, 5 top and 5 bottom layers, 15% infill (grid or gyroid, it does not matter)

  • No supports. The files load front face down: the first layer is the face people see, so a textured (PEI) plate gives the best finish. Do not rotate the part.

  • PLA is fine for the magnet; use PETG or PLA+ for the keychain (bags, cars, sun).

Three walls because only about 3.5 mm is left between the tag pocket and the edge: with fewer, that area prints hollow. Five top and bottom layers because the front is what shows and the floor of the magnet recess has to be solid.

OrcaSlicer and Bambu Studio: leave "Top shell thickness" and "Bottom shell thickness" (mm) at 0, so the layer count rules. PrusaSlicer: Perimeters 3, Solid layers top 5 / bottom 5, Fill density 15%, no support material.

HOW TO ASSEMBLE

  1. Magnet version: put a drop of glue in each recess on the back and press a 10 × 3 mm magnet in. Let it cure before it goes on the fridge.

  2. Keychain: pass the cord through the 6 mm hole (folded loop with a lark's head knot, or one pass with a knot).

  3. Wall mount: screw the part to the wall first, then fit the tag.

  4. Tape mount: two strips of foam tape on the flat back, press for a few seconds.

  5. Snap the tag in from the front until it sits flush. Open the Pingente app, add the tag and send a face.

Changing the battery: pull the tag out from the front, swap the two CR2450 cells, snap it back.

SAFETY AND NOTICE

Neodymium magnets are dangerous if swallowed: the magnet version is not a toy; keep it away from small children and pets.

Pingente does not sell hardware, only the app. The tag comes from an independent manufacturer and you buy it wherever you like. Warranty is the seller's, and checking whether the tag is approved for use in your country is up to the buyer.

PUT THE TAG IN YOUR OWN DESIGN

Want a different shape? The embed module (the tag socket plus its negative for a slicer boolean) is a separate model: https://www.printables.com/model/1870426 · step by step: https://pingente.app/cases/#modulo. Remixes welcome: tag them with pingente.

LICENSE

CC BY 4.0. Print it, remix it and sell the printed parts, crediting "Pingente (pingente.app)". The outline is based on a public-domain icon (svgrepo, "Chunk 16px Thick Interface Icons"), fitted to the tag by our own parametric code and checked in real prints.

More shapes: see the Pingente collection on my profile. Print guide for every slicer: https://pingente.app/cases/

Pingente, by Pantekton · pantekton.app

Tagi