1 / 2
Kingroon KP5L X Axis gantry adapter for 10x15 Drag Chain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Finally got rid of the bundle of wires on my KP5L, created this adapter plate for regular 10x15 drag chains.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Get rid of the bundle of wires or any hack you currently run to keep the wires from the gantry to the hotend from tangling somewhere you dont want.
The cut between the screws is meant to slide in the cables as not to have to rewire everything, you can also use an openable drag chain for ease of adoption.
This mounts on the same screws as your X stepper, you might need longer screws to attach the adapter to the gantry.
