Salt shaker refill funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small funnel designed specifically to refill 250g salt shakers with the rotating cap as shown in the picture. Prints…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Small funnel designed specifically to refill 250g salt shakers with the rotating cap as shown in the picture. Prints fast, requires very little filament and helps save a few pennies by refilling the salt shaker quickly and easily.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Filament:
Generic PETG
Transparent
Notes:
Preferrably to be printed with a food safe filament: I used transparent PETG.
Designed to be printed in vase mode (Cura: "Spiralize outer contour") with 0 bottom layers and the rectangular base touching the buildplate. The sliced result should be as shown.Using a brim is absolutely recommended. The brim can be left in place after printing as it becomes a place to hold the funnel when pouring in new salt. Prints in less than 30 minutes with a 0.4mm nozzle and 0.2mm layer height, and hardly uses any material. At these print settings it is quite delicate, so maybe I suggest using a 0.6mm nozzle and 0.3mm layer height.
The model is weirdly oriented because I started from a 2D scan of the salt shaker cap to start designing the funnel, so that dimensions would be accurate.
Category: Kitchen & Dining