Salt shaker refill funnel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small funnel designed specifically to refill 250g salt shakers with the rotating cap as shown in the picture. Prints…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 40
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Small funnel designed specifically to refill 250g salt shakers with the rotating cap as shown in the picture. Prints fast, requires very little filament and helps save a few pennies by refilling the salt shaker quickly and easily.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Filament:
Generic PETG
Transparent
Notes:
Preferrably to be printed with a food safe filament: I used transparent PETG.
Designed to be printed in vase mode (Cura: "Spiralize outer contour") with 0 bottom layers and the rectangular base touching the buildplate. The sliced result should be as shown.Using a brim is absolutely recommended. The brim can be left in place after printing as it becomes a place to hold the funnel when pouring in new salt. Prints in less than 30 minutes with a 0.4mm nozzle and 0.2mm layer height, and hardly uses any material. At these print settings it is quite delicate, so maybe I suggest using a 0.6mm nozzle and 0.3mm layer height.
The model is weirdly oriented because I started from a 2D scan of the salt shaker cap to start designing the funnel, so that dimensions would be accurate.
Category: Kitchen & Dining