HEXÅDIS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Tileable Hexagonal Pegboard System
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Hexagons are the bestagons. But unfortunately, perfect regular hexagons refuse to play nicely with the rectangular IKEA SKÅDIS slot layout.
With a tiny geometric cheat of non-uniform hexagons, I present to you the fully tileable, full-grid Hexådis!
Key Features
The Best of Both Worlds: Geometric hex aesthetics with 100% native SKÅDIS hook compatibility—including the official contest Hero Model (Xbox Controller Mount) as shown in the pictures!
Zero Wasted Space & Seamless Grid: Edge seams lock together without breaking the slot pattern. Every single slot—even along tile borders—is fully functional and maintains standard SKÅDIS spacing.
Infinite Tileability: Connect tiles endlessly in any direction to cover your entire wall in glorious hexagons.
No Supports, No Connectors, No Problem! Each tile snaps together directly straight off the print bed without printing extra alignment clips.
Heavy-Duty Tested: For serious setups, you can slide common 3mm smooth rods through the built-in alignment holes to seriously reinforce the binding between tiles, although you'll probably be just fine without them too.
Wall Mounting & Assembly
Assembly: Once printed, just slide them together like the world's simplest jigsaw puzzle.
Reinforcement (Optional): Slide extra 3mm smooth rods through the internal channels to truly reinforce those connections if you need extra strength for heavy-duty setups.
Wall Mounting: Secure the tiles directly to your wall through the built-in recessed mounting holes using standard countersunk screws.
Recommended Print Settings
Supports: None! Print flat on your build plate.
Layer Height: 0.20mm (Standard)
Infill: 15% - 40% (Grid, Gyroid, or Cubic)
Perimeters/Walls: 3 (recommended for hook strength)
Materials: Anything, but they can take a serious load if you print them in PETG or ABS.
Disclaimer: I take absolutely no responsibility if your Hexådis-based home gym breaks and causes you a concussion.
License & Community
Released under CC Attribution (CC BY). This is a community project—please feel free to remix, adapt, and improve it. I am eager to see the world covered in hexagons!