Different Gears / Verschiedene Zahnräder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Different gears providing 25, 50, 75, 100 teeth with a thickness of 7mm and a bore diameter of 6.6mm (6mm axle) Mod 2.0
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
Hello,
as I had been in need for some gears maybe someone else has as well a use for them. The idea was to have lightweight gears which print fast and which are using the material efficiently
Gear Parameter:
Modul 2.0
Angle of Attack 20 deg.
Amount of Teeth 25,50,75,100
Thickness 7mm (scaleable through Z axis scaling)
Print parameter (default should be fine)
No brim nor support needed.
2-3 outer layer
3-4 bottom layer
0.28 mm layer height
0.4 mm nozzle
10 - 15 % infill
PETG or PLA works fine
If you need some different amount of teeth or thickness let me know I might be able to provide.
Have fun.