Different Gears / Verschiedene Zahnräder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Different gears providing 25, 50, 75, 100 teeth with a thickness of 7mm and a bore diameter of 6.6mm (6mm axle) Mod 2.0
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
Hello,
as I had been in need for some gears maybe someone else has as well a use for them. The idea was to have lightweight gears which print fast and which are using the material efficiently
Gear Parameter:
Modul 2.0
Angle of Attack 20 deg.
Amount of Teeth 25,50,75,100
Thickness 7mm (scaleable through Z axis scaling)
Print parameter (default should be fine)
No brim nor support needed.
2-3 outer layer
3-4 bottom layer
0.28 mm layer height
0.4 mm nozzle
10 - 15 % infill
PETG or PLA works fine
If you need some different amount of teeth or thickness let me know I might be able to provide.
Have fun.