MKS base + Mosfet case (screwless)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesign from my original to improve some items I found annoying. Again this is a screwless design. The mosfet attach…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Redesign from my original to improve some items I found annoying.
Again this is a screwless design.
The mosfet attach base is seperate from the base plate so that you can easily redesign your own if your mosfet does not fit.
The top grill has cutouts for easier disassembly of the wires without the need for de-coupling from the board.
I also added a grill to add in front of the 80mm fans to avoid wires being caught by the blades.
The design is compatible with my open chain design.
Print Settings
Supports:
No
Resolution:
0.2
Infill:
20
Notes:
3 shells minimum.
I printed mine in PETG, not sure how the snapfits will behave with PLA but I guess it should still be OK.
Category: 3D Printer Parts