X-Shot Spinshot Silly Shell Frontend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A frontend that allows the Spinshot to take Silly Shells
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 852
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction:
I wanted to have the Spinshot become a backup shotgun of sorts, so I decided to make this.
I would NOT recommend yanking the front up, as the shell would just eject itself. Not saying you CAN'T.
You will need to remove the rotating block that cycles the cylinder.
Gemeneye's X-Shot Stock Point is needed for the hammer. Print everything as normal except for the hammer.
Updates:
10/11: Updated 3MF to include everything needed to print. Updated the hammer so that the front end will not fall down if you try to quickly draw it. I have also found that the front end will sometimes drop after firing. It doesn't affect performance, but it can be an issue.
10/18: Created a second version that has the hammer latch onto the shell instead of on the front-end itself, leading to better latching, which fixes the hammer dropping issue and creates a better seal. I have updated everything accordingly.