Specialized Turbo Vado / Como IGH Belt Guard Front Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement front bracket to mount the belt guard on a Specialized eBike
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My kid has broken the OEM version of this bracket twice, and Specialized doesn't sell just the bracket - they want you to buy the whole belt guard parts kit which is a waste of plastic and money. The belt guard is too wide in the front, which allows the crank arms to accidentally catch it sometimes when backpedaling, leading to the breakage. So I also applied a belt sander to the guard itself to make it narrower along the front curve and improve overall fitment to the bike. I recommend doing that as well if you’re having the same issue. It widens the gap between the crank arm and the guard, without impacting the belt or chainring, which you can see in one of the photos.
The weakest part was left just as thin as on the OEM part, in the hopes that it will continue to be the primary failure point in the event of another pedal impact. Then the bracket could be easily reprinted. The OEM part uses a heat set insert to receive the screw that holds the guard onto this bracket, but I don't have any inserts, so I just designed the hole for the screw to cut threads in the printed plastic. Do that first before trying the full assembly.
I printed it in PETG with 0.2mm layer height, 4 perimeters and 6 top and bottom layers (important to allow a little extra meat for the threads to cut), 25% gyroid infill, and autogenerated supports, oriented as it is in the STL. That means a lot of support on that big flat surface, plus inside the screw holes. Once you pry off the support with needle nosed pliers, the remaining surface texture kinda sucks, but it's hidden away inside the guard so nobody needs to see it or touch it after the install.