MLOK Gooseneck Side Scout Light Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flashlight mount intended for magpul SGA or other mlok surface to mount scout style lights.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mlok side scout mount compatible with Surefire/Arisaka/etc scout body lights. Zip includes STL, STP, and some photos of dubious quality. Remix friendly, just tag or give me some credit. Peep the readme and photos for context. Photos demonstrate the short body scout but it is compatible with large/long scout bodies as well.
Originally uploaded on odysee. Reposted for visibility.
README:
Surefire/Arisaka/etc compatible MLOK side mount (with slight goose necking).
==============================================================
Background:
- Designed with the Magpul SGA forend in mind.
- Note the diagonal “cut” on the MLOK mount side. This is designed to accommodate for the slight rib that is present at the farthest forward mlok slot (this caused issues with my aluminum arasaka inline mount, hence the generation of this print)
- Places scout lights approximately 1cm higher above the inline mount but approximately equal elevation to the arasaka side scout mount.
==============================================================
Print information and recommendations:
- Print with filled nylon (PA6-CF/GF, PA612, etc etc.)
- printed with 300blfFDE settings
- 0.18mm layers
- 0.4mm nozzle (likely will print just fine with 0.6mm nozzle but did not attempt yet)
- Print with supports (has a single integrated support but will still require supports turned on for screw insets)
- For reference, I utilized 0.19mm spacing for my supports both integrated and in my slicer
- Orient with MLOK nubs upright / towards the sky
- You’re welcome to play with orientation but printed flat maximizes layer strength for the mount.
- The mlok interface lugs have a small amount of play in them. I used dimensions from a magpul mlok polymer pic rail. You are welcome to change the amount of meat on the lug with the provided STP. Be my guest.
==============================================================
STL/STP provided. Remix friendly. If you want one for the right side just mirror in slicer. Could I have given you a right and a left? Yes. But if the mirror function is the gate that keeps you from printing this in your desired orientation then I’m comfortable with that IQ test. It will also be evidence you didn’t read the readme. And that deserves a paddlin’.
Now go shoot some skeet with a 14” gun. It’s pretty funny.
XOXO
- RC