Anker Prime 200W Under Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Anker Prime 200W brick underneath a desk or in a shelf. Remix for safer overhangs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to mount my Anker Prime 200W power brick in a shelf to hide it away, while still allowing for air circulation and, if needed, removal. The model by @mutz3l was pretty much perfect, particularly the removable bar that allows you to remove the brick if needed, but also provides resistance when inserting cables:
My main concern was about the screw "ears" that looked like they'd require supports or would sag. I probably should have just printed with supports, but then I saw this model by Bundzu that didn't need supports and decided to combine them:
Printing
Print the main body without supports. The locking bar should be printed standing upside down (the STL includes mouse ears for stability) to ensure dimensional accuracy where it matters. I used 4 perimeters for extra strength, otherwise standard 0.2mm balanced profile.
I printed my model in ASA (heat, sunlight on the shelf, overall sagging), so I adjusted some details to account for warping/shrinkage. I have included the OpenSCAD file I used to generate the STL files, so if you use different material, you may want to use it to adjust the tolerances.