1 / 4
Stick Vacuum Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bissell Stick Vacuum wall mount.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this wall mount holder so I can hang my Bissell Stick vacuum. It uses #8 screws and holes are countersunk, it will fit other devices which 16 mm wide. I hope you find this helpful.
Printing Recommendations
Recommended Material: PLA or PETG
Layer Height: 0.20 mm
Walls: 4
Infill: 20%
Supports: No supports required