1 / 2
Begali Pearl Paddles Dust Cover — zdjęcie 1
1 / 2

Begali Pearl Paddles Dust Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Cover protects a set of Begali Pearl Paddles (Key) from dust, bumps and spills on the desktop.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Long ago a book fell on my operating desk and damaged a very nice set of Vibroplex paddles. Paddles are fragile and difficult to clean, so now I cover mine with a protective 3D-printed shell when they are not in use.

This cover precisely fits the Begali Pearl paddles. I designed it from my own measurements and a 3D scan of the base, and guided Claude AI to generate the STL. The cover slides downward over the base with small clearances. Two internal lugs seat in the scallops at the front of the base, so the cover can’t rotate and touch the finger paddles. Any downward forces are transferred directly to the desk surface below, not the paddle base. A slot at the rear allows the cable to stay connected. It has been printed and checked on my own Pearl with stock finger paddles.

Size is about 101 × 121 × 62 mm. The STL is already oriented to print upside down (top face on the bed) and needs no supports. Almost any filament should work; I used PETG on a Prusa XL with a 0.4 mm nozzle and 0.2 mm layers.

Tagi