Begali Pearl Paddles Dust Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Cover protects a set of Begali Pearl Paddles (Key) from dust, bumps and spills on the desktop.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Long ago a book fell on my operating desk and damaged a very nice set of Vibroplex paddles. Paddles are fragile and difficult to clean, so now I cover mine with a protective 3D-printed shell when they are not in use.
This cover precisely fits the Begali Pearl paddles. I designed it from my own measurements and a 3D scan of the base, and guided Claude AI to generate the STL. The cover slides downward over the base with small clearances. Two internal lugs seat in the scallops at the front of the base, so the cover can’t rotate and touch the finger paddles. Any downward forces are transferred directly to the desk surface below, not the paddle base. A slot at the rear allows the cable to stay connected. It has been printed and checked on my own Pearl with stock finger paddles.
Size is about 101 × 121 × 62 mm. The STL is already oriented to print upside down (top face on the bed) and needs no supports. Almost any filament should work; I used PETG on a Prusa XL with a 0.4 mm nozzle and 0.2 mm layers.