Anycubic Mega S mainboard fan 120mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have designed and printed it and pretty sure it will work for 120mm slim fan. Unfortunately 15mm thickness still not…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 393
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I have designed and printed it and pretty sure it will work for 120mm slim fan. Unfortunately 15mm thickness still not slim enough to put back the cover, I will add photos later if I can find slimmer fans cheaply, most likely 12mm thick fans should work. In the meantime, I am using this 2x 5010 fan design https://www.thingiverse.com/thing:5196689
Mounting holes are slotted to enable easy assembly to avoid fan blades and adjust to your preferred position.
If it works, I would appreciate sharing your makes.
Clicking on my AliExpress affiliate link below will give me a small kickback
if you purchase something within 3 days. (at no extra cost to you) https://s.click.aliexpress.com/e/_DmpFxU1