Light Bar, 120cm, Low profile, Ineos Grenadier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low profile light bar for the Kamock or other t-channel mount awnings or racks, 12vdc
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I installed the Kamock Crosswing rear awning to provide a rain cover on the rear for some upcoming fall/winter trips. I wanted rear flood lighting and could not find anything that fit compactly, so I made one. Used waterproof strip LED light with a dimmer hooked into one of the roof power connectors. 3D printed the railing as I couldn’t find an aluminum extrusion that would work. The light pairs nicely with the Kamock awning.
Print the parts, they are doweled for assembly. Purchase the light strip and dimmer on Amazon, pot each and with black silicone.
LED strip from Amazon
https://www.amazon.com/dp/B0C6MD53S8?ref=ppx_yo2ov_dt_b_fed_asin_title
Dimmer from Amazon
https://www.amazon.com/dp/B085TK13SH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Deutsch connector from Amazon
https://www.amazon.com/dp/B0FCB1W7NL?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
8 x 6mm x 15mm SS Black cap Head screws and T-nuts.
Black silicone for potting each end.