Rear Brake Nutted Bolt to Recessed Nut Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For conversion from a side-pull brake to a dual-pivot brake system. When converting, the mounting hole in the frame…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For conversion from a side-pull brake to a dual-pivot brake system. When converting, the mounting hole in the frame need to be widened from 6 to 8 mm to make room for the recessed nut. The rear triangle leaves little to almost no space to insert a drill however, to expand the mounting hole. This adapter enables you to expand the 6 mm mounting hole from the other side, widening both sides to 8 mm. The adapter then reduces one of the holes back to 6 mm. The system is tested and works flawlesly, as is visible in the pictures.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
100%
Filament: BasicFil PETG black
Notes:
Do not print in PLA, as the force the tightened nut exerts on the washer would cause it do deform.
Category: Robotics