1 / 3
Adapter for the Prusa spool holder to fit spools with a larger center hole — zdjęcie 1
1 / 3

Adapter for the Prusa spool holder to fit spools with a larger center hole

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for the Prusa spool holder to fit spools with a larger center hole. Othewise they scratch the bottom.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Hello,

this is a simple material efficient adapter to place inside the spools with  ~73mm big center hole diameter so they fit nicely onto the Prusa spool holder.

Printing

  • PLA is plenty strong enough

  • no brim nor support needed.

  • default parameters are fully fine

Tagi