1 / 10
Sphericon - a double cone with a twist that snakes as it rolls — zdjęcie 1
1 / 10

Sphericon - a double cone with a twist that snakes as it rolls

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An exact sphericon, 60 mm, split flat for support-free printing.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Math
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Take a double cone with a right-angled tip, cut it in half through its axis, and turn one half by 90 degrees. The result is the sphericon: it rolls in a zigzag, snaking path, and every point of its curved surface touches the table along the way.

Maths fact: its curved surface is built from four half-cones that unroll flat without stretching, so a sphericon can be folded from a single paper net.

60 × 60 × 60 mm assembled (radius 30 mm). Split through the centre so both halves print flat-side down without supports; glue face to face.

Files
- sphericon-r30-half-A.stl, sphericon-r30-half-B.stl - print one of each (60 × 60 × 30 mm each)
- reference/sphericon-r30-whole.stl - the uncut solid, for viewing only

Tested: printed in PLA, halves glued, rolls as described (October 2026).

Made with Curiosa Tools - curiosa.tools

**Print settings:** PLA · 0.2 mm · 15-20 % infill · no supports · cut face down as oriented. About 11-13 g and 1-1.5 h per half on a standard printer, 20-30 min fast (estimate).
**Assembly:** turn half B over about its long X axis and match the flat faces (the outline is a half circle on one side and a triangle on the other, so it fits only one way round); glue.

Tagi