Sphericon - a double cone with a twist that snakes as it rolls
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An exact sphericon, 60 mm, split flat for support-free printing.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Math
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Take a double cone with a right-angled tip, cut it in half through its axis, and turn one half by 90 degrees. The result is the sphericon: it rolls in a zigzag, snaking path, and every point of its curved surface touches the table along the way.
Maths fact: its curved surface is built from four half-cones that unroll flat without stretching, so a sphericon can be folded from a single paper net.
60 × 60 × 60 mm assembled (radius 30 mm). Split through the centre so both halves print flat-side down without supports; glue face to face.
Files
- sphericon-r30-half-A.stl, sphericon-r30-half-B.stl - print one of each (60 × 60 × 30 mm each)
- reference/sphericon-r30-whole.stl - the uncut solid, for viewing only
Tested: printed in PLA, halves glued, rolls as described (October 2026).
Made with Curiosa Tools - curiosa.tools
**Print settings:** PLA · 0.2 mm · 15-20 % infill · no supports · cut face down as oriented. About 11-13 g and 1-1.5 h per half on a standard printer, 20-30 min fast (estimate).
**Assembly:** turn half B over about its long X axis and match the flat faces (the outline is a half circle on one side and a triangle on the other, so it fits only one way round); glue.