1 / 5
Little Tikes Ride on Horse and similar replacement wheel rod cover — zdjęcie 1
1 / 5

Little Tikes Ride on Horse and similar replacement wheel rod cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Little Tikes use a simple rod and friction fit washers with a plastic end cover. this is a replacement end cap

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

We acquired a Little Tikes sit and ride on horse toy. Unfortunately the front wheels were missing their  protective covers for the ends of the rod used for the axel. I knocked up this simple and quick design in Tinkercad to replace the missing covers. They are printed in TPU and took approx 11-12 mins to rpint the two parts.

This was on and Ender 3 V2 running Klipper and direct drive extruder. o.4 nozzle and 0.2 layer height with 50% infill. The centre holes are sized to be slightly smaller than the rod diameter to make them a tight friction fit.

Print in the model orientation to avoid supports. If using a PEI plate or similar, they grip fine. Otherwise you might need a small brim to help them grip to your build plate.

Tagi