Fume Illuminator (and Fume Extractor) for 120mm PC fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this for myself. Meaning: first generation design, fixed issues between printing parts, and would have done…
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 1330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this for myself. Meaning: first generation design, fixed issues between printing parts, and would have done much differently. The main issue is the assembly: it's all glued. If anyone feels like designing this properly: please be my guest! :)
...but it works as is, and is incredibly handy.
You will need two 12mm latching push botton switches https://www.amazon.com/dp/B09BKWB95G/ref=cm_sw_r_tw_dp_0TBD4NKTW473A0VX1DCC?_encoding=UTF8&psc=1
A 5.5mmx2.1mm 2 pin DC power socket (7mm thread) https://www.amazon.com/dp/B01N8VV78D/ref=cm_sw_r_tw_dp_MVJPJ7GWS06FJTX7W2R8?_encoding=UTF8&psc=1
A pressure optimized 120mm PC fan https://www.amazon.com/dp/B07GSTMRFB/ref=cm_sw_r_tw_dp_S3KTRXAN2Y37MK9CK1MW?_encoding=UTF8&psc=1
Tons of cyanoacrylate glue (with accelerator) https://www.amazon.com/dp/B0166FFCHS/ref=cm_sw_r_tw_dp_S84BCHJ0HJGDR4HDKRDH?_encoding=UTF8&psc=1
...and a large enough print bed. The design fits the Prusa MK3 with very tight margins.
Any 12V LED strip would work - you should be able to fit two COB strips per side. I used a 15mm wide 240LEDs per meter double row strip that could be cut every 6 LEDs (2.5 cm segmets): https://www.amazon.com/dp/B00NHRFAQW/ref=cm_sw_r_tw_dp_22D0CTY0ZWEQS4VP13DS
Edit: changed fan holder from 108mm to 105mm hole pattern
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Filament: DURAMIC 3D / OVERTURE PETG Black
Notes:
Print alignment and supports shown in the pictures. Make sure the print bed is clean (like... really clean. Soap, water and sponge clean. Not just IPA clean.)
Category: Parts