1 / 20
Fume Illuminator (and Fume Extractor) for 120mm PC fan — image 1
1 / 20

Fume Illuminator (and Fume Extractor) for 120mm PC fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I made this for myself. Meaning: first generation design, fixed issues between printing parts, and would have done…

Rating
0 / 5
Likes
48
Downloads
123
Makes
0
Views
1,333
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

I made this for myself. Meaning: first generation design, fixed issues between printing parts, and would have done much differently. The main issue is the assembly: it's all glued. If anyone feels like designing this properly: please be my guest! :)

...but it works as is, and is incredibly handy.

You will need two 12mm latching push botton switches https://www.amazon.com/dp/B09BKWB95G/ref=cm_sw_r_tw_dp_0TBD4NKTW473A0VX1DCC?_encoding=UTF8&psc=1

A 5.5mmx2.1mm 2 pin DC power socket (7mm thread) https://www.amazon.com/dp/B01N8VV78D/ref=cm_sw_r_tw_dp_MVJPJ7GWS06FJTX7W2R8?_encoding=UTF8&psc=1

A pressure optimized 120mm PC fan https://www.amazon.com/dp/B07GSTMRFB/ref=cm_sw_r_tw_dp_S3KTRXAN2Y37MK9CK1MW?_encoding=UTF8&psc=1

Tons of cyanoacrylate glue (with accelerator) https://www.amazon.com/dp/B0166FFCHS/ref=cm_sw_r_tw_dp_S84BCHJ0HJGDR4HDKRDH?_encoding=UTF8&psc=1

...and a large enough print bed. The design fits the Prusa MK3 with very tight margins.

Any 12V LED strip would work - you should be able to fit two COB strips per side. I used a 15mm wide 240LEDs per meter double row strip that could be cut every 6 LEDs (2.5 cm segmets): https://www.amazon.com/dp/B00NHRFAQW/ref=cm_sw_r_tw_dp_22D0CTY0ZWEQS4VP13DS

Edit: changed fan holder from 108mm to 105mm hole pattern

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

10%

Filament: DURAMIC 3D / OVERTURE PETG Black


Notes:

Print alignment and supports shown in the pictures. Make sure the print bed is clean (like... really clean. Soap, water and sponge clean. Not just IPA clean.)

Category: Parts

Tags