Kuggis (inspired by IKEA Kuggis, for Ender 3 V3 SE)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magazine holder inspired by the renowned IKEA Kuggis
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Magazine holder inspired by the renowned IKEA Kuggis, redesigned to be printed as a single piece on a Creality Ender 3 V3 SE. No assembly, no supports.
Dimensions
Width: 70 mm
Length: 245 mm
Height: 200 mm at the back, about 110 mm at the front
Wall and floor thickness: 3 mm
Inner opening: 64 mm × 239 mm (fits A4 magazines, 210 mm wide)
Print settings (included in the .3mf)
Printer: Creality Ender-3 V3 SE, 0.4 mm nozzle
Slicer: Creality Print 7.3, 0.20mm Standard profile
Material: PLA (Hyper PLA profile), 190 °C nozzle / 50 °C bed
Layer height: 0.2 mm (1000 layers)
Walls: 3, 15% zig-zag infill, 3 top and bottom layers
Supports: no, brim: no
Print time: about 14 h 36 min
Filament: about 340 g (114 m)
Orientation
The part is printed standing up, rotated 45° on the bed to fit within the 220 × 220 mm build area. The footprint is about 219 mm, so a well-leveled and centered bed is required.
Files included
STL model
.3mf file with profile already ready for Creality Print
Notes
Independent model, inspired in shape by an IKEA product but not affiliated with or endorsed by IKEA. Shared for personal and non-commercial purposes.