HJV Nema 17 Bracket 4xM4 V-Slot 40mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder/bracket for Nema 17 stepper motor. Fastening holes are spaced for 40mm wide V-slot rail (20mm), holes arre for…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder/bracket for Nema 17 stepper motor. Fastening holes are spaced for 40mm wide V-slot rail (20mm), holes arre for M4 screws.
Measurements:
Height: 48mm
Width: 47mm
Length: 82mm
Max stepper length: 56mm (motor can be longer if fastening crews won´t go over countersink).
Holes: 4x4,6mm
Countersink: 8mm
Holes for motor: 4x3,6
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
0,20mm
Infill:
20-30%
Filament:
3DJake EcoPLA PLA / PETG
Notes:
Perimeters: 3
Category: Electronics