Nikon Monarch 10x42 Binocular objective lens covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FDM friendly replacements for the original.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought these amazing binoculars almost 25 years ago to be my every day carry pair. They bounced around in my pickup truck for more than 20 years being used daily to inspect infrastructure at a distance. In addition, they accompanied me every time I used my telescopes. At some point, one of the objective caps broke away from its retaining strap, then the other. A couple of years ago one of the caps went missing at a remote star gazing site I and I didn't notice it until I got home. Being generally lazy and cheap, I never contacted Nikon to see if replacement parts are available, I just used some random caps I had in my astronomy stuff. Consequently, I've been meaning to recreate the originals for a while now and I finally got to it. I've included one with the Nikon logo and one without (you might notice I put my logos on my pair, but it's a bit hard to make out). Thanks to Nikon for allowing use of their logo (By Nikon Corporation - https://www.nikon-image.com/common2/img/mod-header/logo_01.svg, Public Domain, https://commons.wikimedia.org/w/index.php?curid=127818824). I enlarged it by about 10% from the original to make it bit more legible (see photos), but in my case the biggest issue is the shiny nature of the TPU I'm using.
It's not an exact replica. I built the model using old fashioned measuring devices and a calculator. Those measurements went into Blender where I used them to create a print friendly design. I also took the opportunity to enlarge the 'ears' a bit to address an issue with my bumbling fingers. I anticipate I'll make a set from glow in the dark TPU at some point - then I won't lose one in the dark again.
I made mine with ZYLtech 95A TPU, sliced in Cura and printed with a 0.4mm Diamondback nozzle @ 0.2 mm layer height on my Ender3 S1 Pro running Thomas Toka's firmware. If you print this and it doesn't quite fit your pair, just try scaling it in your slicer by a percent or two, even in the z axis, to get an exact fit that feels like the original.
If you print these I'd love to see your make, and if you like it don't forget to hit that button. If these work on newer models (I'm pretty sure mine is first generation) I'd love to know that. Finally, please respect the non-commercial part of the license. I meant this to be free, please make sure to keep it that way.
Steve
