1 / 1
Headway 38120hp 70mm heatshrink cutting guide — zdjęcie 1

Headway 38120hp 70mm heatshrink cutting guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cutting guide for 70mm flat heat shrink, for Headway 38120hp cells

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I had to re-wrap several Headway 38120hp cells so I made this guide to get a consistant length on each shrink wrap I cut.

Made for 70mm flat measured heat shrink.

Just slide the heat shrink in the slot at the end.
Pull it through the guide until it touches the tab at the opposite end.
Place your knife in the top slot and cut from edge to edge.
After cutting slide the heat shrink over the tab and pull it out of the guide.

Printed in PLA with my standard settings.
Recommend 3 vertical walls, top and bottom layers and 10% endfill.