1 / 1
Headway 38120hp 70mm heatshrink cutting guide — image 1

Headway 38120hp 70mm heatshrink cutting guide

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A cutting guide for 70mm flat heat shrink, for Headway 38120hp cells

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
5
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

I had to re-wrap several Headway 38120hp cells so I made this guide to get a consistant length on each shrink wrap I cut.

Made for 70mm flat measured heat shrink.

Just slide the heat shrink in the slot at the end.
Pull it through the guide until it touches the tab at the opposite end.
Place your knife in the top slot and cut from edge to edge.
After cutting slide the heat shrink over the tab and pull it out of the guide.

Printed in PLA with my standard settings.
Recommend 3 vertical walls, top and bottom layers and 10% endfill.