1 / 5
Adapter - People's Repeater to Patriot Lighting — zdjęcie 1
1 / 5

Adapter - People's Repeater to Patriot Lighting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For use with the Patriot Lighting Solar Panel shells from model 356-9480. Remix power!

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I had to find a way to implement these for Meshcore builds when Menard's had these on sale for $6 a piece. Not a hard trick. In the files you will find v1 which I used, which allows you to adapt to The People's Repeater. https://www.printables.com/model/1768397-the-peoples-repeater-affordable-solar-mesh-repeate

It's a little loose in the attachment to that design, so I made v2 with a couple extra friction points. Either way, I recommend sealing that with silicone caulk or silicone tape anyway. 

The third file is a plug for the additional button in the enclosure design. I sealed it in place with JB Superweld. The pole switch can remain fully functional, I implemented it between the solar lipo charger board and the board you choose. 

Be sure to harvest the rubber gasket from the original pivot! I almost missed that one myself. 

Tagi