1 / 5
Adapter - People's Repeater to Patriot Lighting — image 1
1 / 5

Adapter - People's Repeater to Patriot Lighting

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For use with the Patriot Lighting Solar Panel shells from model 356-9480. Remix power!

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
54
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I had to find a way to implement these for Meshcore builds when Menard's had these on sale for $6 a piece. Not a hard trick. In the files you will find v1 which I used, which allows you to adapt to The People's Repeater. https://www.printables.com/model/1768397-the-peoples-repeater-affordable-solar-mesh-repeate

It's a little loose in the attachment to that design, so I made v2 with a couple extra friction points. Either way, I recommend sealing that with silicone caulk or silicone tape anyway. 

The third file is a plug for the additional button in the enclosure design. I sealed it in place with JB Superweld. The pole switch can remain fully functional, I implemented it between the solar lipo charger board and the board you choose. 

Be sure to harvest the rubber gasket from the original pivot! I almost missed that one myself. 

Tags