1 / 6
Haunted Manor Halloween Diorama Kit — zdjęcie 1
1 / 6

Haunted Manor Halloween Diorama Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular haunted house diorama with graveyard, ghost and jack-o'-lantern. Glue-free, lit by 3 LED tea lights.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A modular Halloween diorama: a Victorian haunted house with a tower, porch, chimney and iron roof cresting. The yard has a graveyard with a rising ghost, a coffin, a dead tree with bats, a black cat, an iron gate arch, a fence and a glowing jack-o'-lantern. There is room for 3 LED tea lights, so the windows and the pumpkin light up at night.

Features

  • Everything is printed: no glue, no screws, no magnets

  • Every part plugs into the base with a peg, or sits over a locating lip

  • Each part is single-colour, so you can print each one in its own colour

  • Designed for 250 x 250 x 250 mm printers. The biggest part is the 240 x 180 mm base

  • Assembled size: 240 x 180 x 265 mm

  • The one in the photos is printed in green with grey and black details

LED Tea Lights (not included)

  • 3 standard battery LED tea lights, 38 mm diameter

  • There is a shallow pocket for each one in the base: inside the house, inside the tower and under the jack-o'-lantern

  • To switch them on or off, lift the house, the tower or the pumpkin off the base. They are only seated, not clipped

Print Settings

  • 0.2 mm layers, 2-3 walls, 10-15% infill

  • All parts are laid out and oriented in the 3MF (10 plates)

  • No supports needed, except maybe on the tree if your printer struggles with small overhangs

Suggested Colours

  • Base: dark grey or green

  • House body, tower: cream / bone

  • Roof, spire, porch roof: purple

  • Roof cresting, gate arch, fence (x8), tree, cat: black

  • Chimney, gate pillars (x2), tombstones (x4): grey

  • Porch, coffin: brown

  • Door: orange (or black)

  • Ghost: white (glow-in-the-dark is great)

  • Pumpkin lantern, small pumpkins (x2): orange; pumpkin stem: green

  • Optional liners for the house and tower: natural / translucent white or yellow, 2 walls. They make the windows glow evenly

Assembly

  1. Base: put the 3 tea lights in their pockets.

  2. Optional: drop the liners into the house and the tower. They rest on the foundation lips.

  3. House: lower it over the large rectangular lip. Tower: lower it over the square lip.

  4. Door: press it into the door opening from the front.

  5. Roof: set it on the house. The ribs underneath drop inside the walls. Push the cresting tabs into the three slots on the ridge.

  6. Spire: set it on the tower. The groove underneath fits over the tower's top rim.

  7. Chimney: onto the square peg beside the right-hand wall.

  8. Porch: onto its two square pegs in front of the door. Porch roof: onto the two pins on the porch beams. The small pumpkins sit on the porch.

  9. Gate pillars: onto the square pegs. Gate arch: its feet go onto the pins on top of the pillars.

  10. Fence: 8 identical sections. Each post goes onto a round pin.

  11. Tree, tombstones, coffin, ghost and cat: onto their pegs or pins.

  12. Pumpkin lantern: over the round lip around its tea light. Then plug in the stem.

Fit

  • Pegs are 6 mm square and 3 mm round, with 0.2 mm clearance per side.

  • If a part is too tight, sand the peg lightly. If it is too loose, a turn of tape on the peg fixes it.

Tagi