1 / 6
Haunted Manor Halloween Diorama Kit — image 1
1 / 6

Haunted Manor Halloween Diorama Kit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modular haunted house diorama with graveyard, ghost and jack-o'-lantern. Glue-free, lit by 3 LED tea lights.

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
43
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A modular Halloween diorama: a Victorian haunted house with a tower, porch, chimney and iron roof cresting. The yard has a graveyard with a rising ghost, a coffin, a dead tree with bats, a black cat, an iron gate arch, a fence and a glowing jack-o'-lantern. There is room for 3 LED tea lights, so the windows and the pumpkin light up at night.

Features

  • Everything is printed: no glue, no screws, no magnets

  • Every part plugs into the base with a peg, or sits over a locating lip

  • Each part is single-colour, so you can print each one in its own colour

  • Designed for 250 x 250 x 250 mm printers. The biggest part is the 240 x 180 mm base

  • Assembled size: 240 x 180 x 265 mm

  • The one in the photos is printed in green with grey and black details

LED Tea Lights (not included)

  • 3 standard battery LED tea lights, 38 mm diameter

  • There is a shallow pocket for each one in the base: inside the house, inside the tower and under the jack-o'-lantern

  • To switch them on or off, lift the house, the tower or the pumpkin off the base. They are only seated, not clipped

Print Settings

  • 0.2 mm layers, 2-3 walls, 10-15% infill

  • All parts are laid out and oriented in the 3MF (10 plates)

  • No supports needed, except maybe on the tree if your printer struggles with small overhangs

Suggested Colours

  • Base: dark grey or green

  • House body, tower: cream / bone

  • Roof, spire, porch roof: purple

  • Roof cresting, gate arch, fence (x8), tree, cat: black

  • Chimney, gate pillars (x2), tombstones (x4): grey

  • Porch, coffin: brown

  • Door: orange (or black)

  • Ghost: white (glow-in-the-dark is great)

  • Pumpkin lantern, small pumpkins (x2): orange; pumpkin stem: green

  • Optional liners for the house and tower: natural / translucent white or yellow, 2 walls. They make the windows glow evenly

Assembly

  1. Base: put the 3 tea lights in their pockets.

  2. Optional: drop the liners into the house and the tower. They rest on the foundation lips.

  3. House: lower it over the large rectangular lip. Tower: lower it over the square lip.

  4. Door: press it into the door opening from the front.

  5. Roof: set it on the house. The ribs underneath drop inside the walls. Push the cresting tabs into the three slots on the ridge.

  6. Spire: set it on the tower. The groove underneath fits over the tower's top rim.

  7. Chimney: onto the square peg beside the right-hand wall.

  8. Porch: onto its two square pegs in front of the door. Porch roof: onto the two pins on the porch beams. The small pumpkins sit on the porch.

  9. Gate pillars: onto the square pegs. Gate arch: its feet go onto the pins on top of the pillars.

  10. Fence: 8 identical sections. Each post goes onto a round pin.

  11. Tree, tombstones, coffin, ghost and cat: onto their pegs or pins.

  12. Pumpkin lantern: over the round lip around its tea light. Then plug in the stem.

Fit

  • Pegs are 6 mm square and 3 mm round, with 0.2 mm clearance per side.

  • If a part is too tight, sand the peg lightly. If it is too loose, a turn of tape on the peg fixes it.

Tags