SNES 2X5.5MM Through-Hole DC Barrel Jack Replacement Backplate

This is a backplate for North American (non-Jr.) Super Nintendo consoles that have had their stock DC barrel connectors replaced with a standard 2X5.5MM through-hole DC barrel jack. The North American SNES used a proprietary DC barrel connector, while the otherwise identical Japanese Super Famicom used a largely standard 2X5.5MM connector. 

There aren't many reasons to proactively install one in a working SNES, but in my experience the proprietary connectors have a tendency to break, so this could be used as an alternative to replacing a broken one directly. More likely though, if you're doing a shell swap on a Super Famicom system, or just want a custom backplate to match a given aesthetic, this would work well for that. 

Designed around this part specifically, which works out of the box with SNES consoles:
https://www.digikey.com/en/products/detail/same-sky-formerly-cui-devices/PJ-037A/1644545

Personally, I reccomend this power supply for SNES and SFC systems:
https://www.digikey.com/en/products/detail/triad-magnetics/WSU090-1300-R/3094978

Remember, the SNES is CENTER PIN NEGATIVE.
If you want to use an unmodified SNES with one of the PSU's, which are really what you should be using these days, you can easily adapt them to fit the proprietary SNES jack:
https://console5.com/store/super-nintendo-snes-power-supply-adapter-plug-cable.html