Fujifilm NP-W126S Rugged Battery & SD Card Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your spare batteries and SD cards together in a compact, rugged-style case.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 400
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for two Fujifilm NP-W126S batteries and three full-size SD cards, with a hinged lid, reinforcing ribs, and a separate latch.
The batteries and cards sit slightly above their compartments so you can grab them easily.
What fits
• 2 × Fujifilm NP-W126S batteries
• 3 × full-size SD cards
Printing & assembly
Print the fit-test piece first to check the battery and card fit before printing the complete case.
The included 3MF has the base, lid, and latch arranged together on one plate, ready to print in a single run.
For assembly, you’ll need 3 × M3 × 20 mm socket-head screws. All screws use the same length and thread directly into the printed plastic—no nuts or inserts required.
This design is a remix of SuperWilli’s Fujifilm NP-W126S Battery Case, adapted with revised battery/card layouts and hardware details.
Thanks also to the creators behind the earlier designs in this remix chain:
• andrepadua — Rugged Box, Single Hinge Remix
• Whity — Rugged Box, Parametric
• Yanev — Tool Box, Parametric
Shared under Creative Commons BY-NC-SA 4.0.