1 / 4
MakerFarm 8" i3v Z and Y Axis Brackets for Dampener
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This upgrade is good to make your printer quieter. The difference is noticeable. I used M3 5mm screws for screwing the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This upgrade is good to make your printer quieter. The difference is noticeable.
I used M3 5mm screws for screwing the dampener to the motor and you can reuse the screws that are used before to screw it to the 3d printed model.
Here are eBay links to the items:
Print Settings
Printer:
MakerFarm 8" Prusa i3v
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Category: 3D Printing